For the data information adjustment of the folding gluing machine, open the control system software of the equipment, click the upper left document – equipment settings – basic control parameters – system software settings, and the full-automatic case sticking machine removes the check mark in front of “check the negative positioning of slotting before increasing the starting point”. For the data information on the right, the full-automatic case sticking machine changes the data information of “move before adjusting” to “8″. In the control of the basic parameter – IO socket setting, except for the 0 axis and 2 axis sockets, the automatic folder gluer machine only has the 1 axis socket.

 In the main parameters on the right side of full automatic folding and gluing machine, quantitative analysis moving is enabled, the spacing is 500, then click the slotting clamping, make a mark when the feeding is gradual, then click the slotting clamping, loosen the clamping, press the feeding button, after the interruption, measure the length of the practice activity, click the file of the automatic box gluing machine, set and control the basic parameters of the equipment, correct the main parameters of the fitness movement, In the column of practical activity moving distance, input the data of practical activity moving distance, such as practical activity moving 502, and type 1004 in this column by the automatic folder and gluer equipment.

 The full automatic folding and gluing machine will recalculate, and each mm single pulse will automatically display a column of data, which will be clarified and stored later. Then, if the accuracy is prohibited, repeat the automatic case sticking process until the corresponding accuracy is reached, and then cancel the start of quantitative analysis moving. To measure the deep layer, open the control system of the fully automatic box gluing machine – adjust the rise – calibrate – test the knife, and look at the deep layer of the slotting. If the deep layer is shallow, adjust the compensation data after calibration, and remember to add 0.1 or 0.2. Then repeatedly use the fully automatic box gluing machine to reach a satisfactory deep layer; If the deep layer is deep, adjust the data of compensation after calibration. The full automatic folding and gluing machine will reduce the data little by little until the appropriate deep layer is cut.

 The feeding control module of the fully automatic case sticking machine of the CNC machine tool is assembled by the belt device and the fully automatic deviation correction device. Good full-automatic case sticking machine belt equipment should use the belt with good surface sliding friction, and it is not easy to scratch the printed paper; The friction force of the belt surface selected by the automatic case sticking machine is better than that of the ordinary belt stems on the market, and it can save the cost of replacing the belt and the time of machine adjustment for the automatic case sticking machine.

 At present, there are two methods for the automatic deviation correction device of the fully automatic box sticking machine of CNC machine tools: one side deviation correction device and the other side deviation correction device, which can improve the accuracy of slotting and reduce the damage rate of materials. The full-automatic paper card full-automatic carton gluing machine, one of the full-automatic carton gluing machine series products manufactured by the company, can also open one side of the special-shaped raw materials, such as wine box packaging, leather shells, etc., in addition to solving the slotting of ordinary paper cards. The full-automatic carton gluing machine can help customers expand their business scope and improve the benefits of the full automatic folding and gluing machine.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975