The Paper coating machine can coat rolled substrates such as paper, cloth, leather, aluminum foil, plastic film, etc. with a layer of special functional adhesive, coating or ink, and dry them for thousands of layers to roll. Coating machines are mainly used for shoe materials, electronics industry, EVA, PE, fabrics, papermaking, printing, battery plates, battery plates, and other adhesive applications

Process requirements:

Kraft Paper coating machine  needs to evenly adhere adhesive or ink substances to the surface of aluminum foil, plastic film, or fabric textiles, which requires a high coating process. Therefore, there is an urgent need for the use of ginger paste, broom, and cotton shock medicine.

The coating process is mainly completed by five parts: unwinding, coating, drying, pulling, and winding, among which the most important is the coating process. According to the coating method, the MuShang SenXi machine can be mainly divided into the following types: air knife coating machine, scraper coating machine, box board paper coating machine, horizontal paper rolling machine, frame up and down paper feeding and rolling machine, Doublue side coating machine  ,single side paper coating machine, etc.

The working principle of the automatic coating machine used for screen printing plate making is the same, but its performance varies depending on different models and production factories. The screen coating and the continuous rack are equipped with devices that can tighten the mesh frame. The front and back of the wire mesh area are the coating mechanism for algal blooms, which consists of a coating tank and mechanical components or gas trap components that control the angle and pressure of removing the debris.
Main technical parameters of  paper coating line

1. Production varieties: coated cardboard, kraft paper, corrugated paper, grey cardboard, and yellow cardboard.

2. Raw paper basis weight: i00-5oo g/m2

3. Equipment width: 1600-4000mm

4. set speed: 100-220m/min5, nominal output: 30-200 tons/day.

6, coating form: air knife, scraper coating

7, coating amount: (max) 10-30g/m2

8, coating solid content: (max) 38-62%

9, steam heating: 0.7Mpa
10. Drying oven working temperature:. 140c
11、 Lead method: manual paper feeding with a mesh of 5 papers
12. Electric control mode: AC frequency division transmission 2. 1 person
Install the clean and fine mesh coating machine in front of it, and some models can also install the mesh from the side. In order to significantly
In models with a mesh frame design, side mounted versions are more common because the mesh frame is large and bulky, and side mounted versions can reduce lifting and movement by √ arrows, making them more rigid from a balanced surface.
Some. In the first operation, the mesh adding machine is connected to other automatic mesh processing equipment (such as cleaning equipment, Ransheng equipment, thousand coal device, and bean shadow machine factory)
The first advantage of a scraper coating machine is that it does not require very soft coatings like an air knife. Because metal scrapers can scrape through harder coatings, high concentration coatings can be used, reducing the need for a base air disc and greatly improving coating speed
The T-th table, as long as the edge of the cutting force can always maintain a straight line, the coating surface is very smooth.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975