High-speed ink printing flexo printer die cutting slotting machine is a key production process for post-press production and processing. It is suitable for the finishing production and processing of various printed surface. The poor quality of high-speed ink printing circular press die-cutting machine can directly damage the industry image of all goods, so grasp the traditional film cutting and stamping technology and the new film cutting technology products, Can reasonably improve the competitiveness of printing enterprises.

The produced and processed plates are in the middle of the two. The finishing technology of film cutting is solved under the working pressure of high-speed ink printing circular die-cutting machine. The film cutting press plate has different types and corresponding press cutting organization, so that the high-speed ink printing circular press die-cutting machine can be divided into three basic types: flat, flat and round. And the flat die-cutting machine can be divided into horizontal and vertical types due to the different positions of the platen and plate-pressing direction.

In the production, processing and manufacturing of cartons, the paper feeding process of high-speed ink printing circular die-cutting machine is the key. The proper transportation of cardboard is related to several problems such as printing film cutting. If the paper feeding error occurs, it will cause problems such as printing brush prohibition, color difference, film cutting position prohibition, and line skew.

High-speed ink printing circular die-cutting machine is used to stack the cartons with the burden, and the positioning equipment shall be carried out for the produced and processed cardboard in the whole process of transmission. High-speed ink printing circular die-cutting machine is carried out in the conventional way of film cutting.

The high-speed ink printing automatic flexo printing die cutting slotting machine can adjust the position between the upper and lower claw blocks and the transmission gear plate. The claw block moves upward. The press cutting force makes the claw block move one tooth each time. The change in the distance between the two large surfaces of the high-speed ink printing circular press die-cutting machine is about 0.1mm, generally only one tooth at a time.

It should be considered to replace the new transmission gear eccentric sleeve and the distance adjusting eccentric sleeve, so that the claw block is located at the rear tooth of the high-speed ink printing circular die-cutting machine above the high-speed ink printing circular die-cutting machine of the tooth block. It can also adjust the high-speed ink printing circular press die-cutting machine according to the following ways: loosen the screw, make the tooth type adjusting plate loosen the drive gear eccentric sleeve, and use the drive gear wrench to turn the drive gear eccentric sleeve to the rear of the whole machine. At this time, it should be noted that the number of teeth rotated on both sides is the same, and no more than three teeth can be rotated at a time.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975