The automatic carton folder gluer machine  has the following features:

 Use secondary crimping (the crimping wheel used to prevent the breakage of paperboard during the crimping process) and ensure accurate positioning;

 The paper folding method used in the operation of paperboard makes the paperboard form correctly and smoothly after pasting;

 PLC program is used to control the secondary automatic correction of the formed cardboard, so that the bonded cardboard box reaches the ideal squareness;

 The height line shall not be greater than ± 0.5mm;

 The operating speed is 200 m/min (the average operating speed is 180~240 sheets/min), and the whole machine is reasonable in structure and easy to operate.

 The main machine of the carton gluing machine is composed of left and right wallboards, three transmission rubber rollers, one carton pressing roller, carton gluing head, positioning frame, cardboard pushing and other main components.

 The main machine for sticking the box is the main part of automatic carton box folder gluer machine. It is driven by the motor and reducer through the chain wheel and chain to rotate the three rubber rollers. Complete the conveying action when sticking the box. The sprocket at the other end of the rubber roller is connected with the eccentric mandrel sprocket by the chain. The rubber roller rotates to drive the eccentric mandrel, and the push board connected with the eccentric mandrel makes reciprocating motion to complete the action required for pushing the carton. The press wheel on the press wheel shaft plays a bonding role when passing, and the height is adjusted by the hand wheel.

 The rotation of the glue roller in the glue box head is decelerated by the motor and driven by the sprocket, so that the glue roller rotates to reach the action of glue box. The glue head in the glue box head is removed and cleaned after the work is completed, so that the glue roller will not be dried by the glue, which will hinder the flexible rotation of the work.

 When pasting cartons of different sizes, the distance between positioning frames can be adjusted to complete the guiding action required for large and small cartons.

 In recent years, the demand for milk boxes, food boxes, beverage boxes, and electrical boxes is increasing. These cartons are characterized by a large demand and the combination of adhesive and paste, and the general production enterprises use the assembly line canning operation, so the requirements for the geometric dimensions of the carton bonding molding are very strict. If the height line and scissors difference of the carton exceed ± 2mm, the production will not meet the standard.