How to adjust the cutter of automatic carton slotting machine?

 1. The staff who actually operate the carton slotting machine must understand the structure, principle and operation steps of the carton machine.

2. The actual operation personnel of the carton slotting machine shall never wear gloves to carry out the actual operation, and shall not touch the transmission belt, part of the transmission system, knife head, etc. of the carton slotting machine to avoid injury.

3. Before starting the carton slotting machine, check whether special tools or other dirt are placed on the top of the paper feeding cabinet. At each start, ring the bell first, and get the response from the actual operating staff of the equipment before starting the carton machine. If you don’t drive after ringing the bell, you should ring the bell again after a period of time, and then start the operation after confirmation. When starting the carton slotting machine, it is forbidden to run at a high speed immediately. Start from zero speed and slowly turn the speed knob to the rated working speed.

 4. For part of the adjustment of the carton slotting machine, the actual operation shall be strictly followed. The wounds of the slotting knife of the carton slotting machine and the paper separating knife of the carton slotting machine are very sharp and easy to hurt hands; The upper slotting knife of the carton slotting machine must be placed in the lower slotting knife of the carton slotting machine at the middle position. After adjusting the carton slotting machine knife, be sure to lock the tightening screw, and pay attention to putting the carton slotting machine paper shovel knife into the paper shovel slot. After the four knives are aligned, remember to lock the screw firmly. After the adjustment and clamping in each place, first use the rocker to rotate the carton slotting machine slotting part for two turns. If there is no abnormal situation, you can perform the actual operation again. When the carton machine and equipment are running at high speed, if you do not pay attention, you will encounter sharp carton slotting machine wounds. Be especially careful. During production and manufacturing, it is easy to cause accidents if safety operation rules are violated.

 5. For plate pasting, plate wiping, knife adjustment, dirt, dirt, paper strips or cleaning carton slotting machine, turn off the power supply of the startup switch and then turn off the machine, and remind the surrounding staff to avoid others from opening it by mistake.

 6. When changing and washing ink, do not touch the rotating position of the carton slotting machine, and do not use a towel to wipe the stains on the ink roller;

 7. The anilox roll, rubber roll and printing plate roll are the cardiovascular system of the carton printing equipment. No dirt or scratches are allowed. They should be cleaned up before going off duty.

we also have semi-automatic printing slotting die cutting machine,  ink wastewater treatment clear machine and so all.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975