I think the two important parts of the core components of the  full automatic folding gluing machine are the gluing section and the cardboard feeding section

automatic carton folder gluer machine department:

The gluing device in the fully automatic box gluing machine includes a glue box, wherein the upper end face of the glue box is opened, and a mounting frame is set inside the glue box. The mounting frame is movably equipped with a gluing wheel, and the upper edge of the gluing wheel extends out of the opening of the upper end face of the glue box. The glue box is movably equipped with a movable plate, and the lower part of the glue box is equipped with a cylinder. The piston rod of the cylinder is fixedly connected to the lower end face of the movable plate, and an elastic sealing ring is wrapped around the outer edge of the movable plate, The outer edge of the elastic sealing ring conflicts with the inner wall of the rubber box. The inner wall of the rubber box is equipped with a liquid level sensor, and a pressure wheel height adjustment mechanism is set on the rubber box. The pressure wheel height adjustment mechanism is movably connected to a pressure wheel, and the position of the pressure wheel is set above and corresponding to the rubber wheel. The rubber box is also equipped with a guide plate. The lower end face of the guide plate near the rubber wheel is flush with the lower edge of the pressure wheel, and the other side of the guide plate tilts upwards.

High speed folding gluing machine cardboard feeding department:

Fully automatic box gluing machine feeding cardboard
The conveying device of the paper feeding section includes a bracket and a guide roller. Two parallel guide rollers are installed on the bracket, and several spaced belts are installed on the guide roller. The belts are evenly opened with several through holes, and several pipes perpendicular to the belt transmission direction are evenly installed between the upper and lower layers of the belt. The pipes are plastic pipes with one end closed and a rectangular cross-section, and the upper side of the pipes is connected to the belt
The upper layer is equipped with suction holes at the opposite position, and the other end of the pipeline is connected to an suction pump.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975