For the data information adjustment of the automatic folding and gluing machine, open the control system software of the equipment, click the upper left document – equipment setting – basic control parameters – system software setting, the automatic box gluing machine removes the check mark in front of the “check the negative positioning of the slot before raising back to the starting point”, and the data information on the right. The automatic box gluing machine changes the data information of the “move before adjusting” to “8″. In the control basic parameter – IO socket setting, the number can be checked by removing the sockets of Axis 0 and Axis 2. The automatic box gluing machine only has the number of Axis 1 socket.

In the main parameters on the right side of the fully automatic case gluing machine, quantitative analysis and movement are enabled, and the spacing is input by 500, and then the slot clamping is clicked. When the feeding is gradual, a mark is made, and then the slot clamping is clicked, the clamping is loosened, and the feeding button is pressed. After the interruption, the length of the practice activity is measured. The fully automatic case gluing machine opens the document, and the basic parameters of equipment setting and control are corrected, In the column of movement spacing of practice activities, enter the data of movement spacing of practice activities, such as 502 movement of practice activities, and type 1004 in the column of automatic box gluing machine.

The automatic box gluing machine calculates again, and each mm of single pulse will display a column of data automatically, which will be defined later, and then stored. Then, if the accuracy is prohibited, repeat the automatic case gluing machine until the corresponding accuracy is reached, and then cancel the activation of quantitative analysis movement. Measure the depth, turn on the control system of the automatic box gluing machine – adjust the height – calibrate – test the knife, and see the depth of the slot. If the depth is shallow, adjust the compensation data after calibration, remember to add 0.1 or 0.2, and then repeatedly use the automatic box gluing machine to reach the satisfactory cutting depth; If the depth is too deep, adjust the compensation data after calibration, and the automatic box gluing machine will reduce the data bit by bit to reach the appropriate deep cut termination.

The feeding control module of the automatic box gluing machine of the CNC machine tool is assembled by the belt equipment and the automatic deviation correction device. A good belt equipment of the fully automatic case gluing machine should use a belt with good surface sliding friction, and it is not easy to scratch the printing paper; The surface friction of the belt selected by the automatic box gluing machine is better than that of the common belt stems on the market, and it can save the cost of replacing the belt and adjusting the machine time for the automatic box gluing machine.

At the present stage, there are two methods for the full-automatic deviation correction device of the full-automatic box gluing machine of the CNC machine tool, one side deviation correction device and the other side deviation correction device, which can improve the slotting accuracy and reduce the material damage rate. The full-automatic carton gluing machine in the full-automatic carton gluing machine series products manufactured by the company can not only solve the slotting of ordinary paper cards, but also open one side of special-shaped raw materials, such as wine box packaging, leather shell, etc. The full-automatic carton gluing machine can help customers expand their business scope and improve the benefits of the full-automatic carton gluing machine.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975