There are various types of Semi automatic sewing stitching machine available for people to use now. Now they have excellent technology to produce products. Different products have different advantages, which is now understandable to people. There are a wide variety of products. Mechanical products have received more attention since their emergence. There are a wide variety of mechanical products. There are more different types of products currently underway. So, let’s take a look at the debugging methods of semi-automatic box stitching machines.

Debugging is a necessary step before the semi-automatic box stitching machine starts working. Whether the box stitching machine is debugged or not will directly affect the effectiveness of box stitching and the efficiency of the box stitching machine.

How to debug a Semi automatic stitch machine?

1. Turn off all power switches of the machine, rotate the middle position of the clamping mechanism to the appropriate mold width through the joystick, and place the inspected mold into the clamping mechanism and close the mold. When the mold is large, it is necessary to ask for cooperation from others to prevent potential hazards and damage to the mold.

2. Use a spatula to clean the tape residue on the opened movable steel plate to avoid affecting the normal production of the next variety.

3. Use an Allen wrench to unscrew the screws securing the steel plate and use a wooden pad to support it. According to the product requirements, fix the prepared pad paper with kraft tape on the platform below the steel plate, and then carefully remove the wooden pad, taking care not to press it onto your hands. Then use an Allen wrench to fix the screws and steel plate on the movable body.

4. Fix the waste cardboard or semi-finished products used for machine adjustment on the steel plate with kraft paper tape. The flute is the same as the product to be produced. The size and position of the cardboard are exactly aligned with the position of the knife mold.

5. Restart the semi-automatic box stitch machine, use the movable body to close the stable pull plate when descending, stop the movable body back and forth once, and use a sponge strip or iron hook to position and fix the edge cutting position of the semi-finished product, which requires die-cutting. General box type, check if there are any indentations on the die-cut cardboard, if it is ideal, and if there are any abnormalities in the knife mold. Otherwise, further debugging is required.

The customer is very concerned about the packaging of the product. If the packaging cannot keep up, it is easy for consumers to feel that the product quality is not good. The semi-automatic box stitching machine is a production technology for cardboard box forming machinery. Its contribution directly affects the appearance quality of the cardboard box and the brand positioning of the enterprise, as well as the operation of the cardboard box. So how do we usually debug a semi-automatic box stitching machine?

The upper part of the semi-automatic stitching machine body is equipped with a nail head, a wire feeding mechanism, and a driving motor. There are several pulleys installed on both sides of the middle of the fuselage, with two rows of upper and lower pulleys with toothed shapes. The belt is driven by an electric motor, forming a cardboard drive mechanism. The lower part of the machine body is equipped with a positioning baffle perpendicular to the paper feeding tray and toothed belt. It slides and is connected to the operating pedal below the body.

There are three debugging methods for semi-automatic box stitching machines:

1. The bench test simulates several typical operating conditions in the actual operation of the laboratory, and checks whether the functional indicators of the laboratory bench meet the design requirements.

2. Computer simulation can dynamically simulate mechanical parts and observe the motion relationships between various moving components.

3. Before the modern mechanical system is officially put into operation, on-site debugging should be carried out to identify and solve problems in a timely manner.

If uncertain, it will affect the nail box effect of the semi-automatic stitch box machine. To improve the productivity of the semi-automatic box stitching machine, lubricate the nail head and punch of the machine once a day; Clean and clean the nails, and remove them for cleaning and refueling after each month;

It is necessary to regularly clean the cooling dust filter driven by the servo motor, and the gears and chains of the semi-automatic box stitching machine need to be lubricated with butter once a month to prevent mechanical component wear. The upper nail head punch is lubricated once a day, and the nail head is removed every 30 days for cleaning and refueling. The lower nail head is prone to dust accumulation in the punch and requires frequent cleaning.

The above is the debugging method for semi-automatic box stitching machine. If you need to learn more, feel free to contact us at any time! Our company has many years of experience and we look forward to your joining at any time.

Our company also has other packaging machines : carton box partition assembler equipment 、 automatic paper angle board machine 、 automatic air bubble film machine 、 flexo water ink wastewater treatment clear machine 、 automatic carton folding gluing stitching machine、 2 color flexo printing slotting die cutting machine 、automatic nail box machine 、 automatic thin blade machine 、automatic stacking machine 、 Kraft paper slitting and rewinding machine and so on . 

Welcome to email for product details . We’ll supply the best service for you .  

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975