Nowadays, automatic flexo printing slotting die cutting machine is widely used in the packaging industry and have become essential products. What are the advantages of fully automatic ink printing machines?

The operating methods of a fully automatic ink printing machine mainly include the following aspects:

1. Personnel operating the machine must be familiar with the structure, working principle, and operating methods of the equipment.

2. Machine operators are not allowed to wear gloves during operation. Female employees should tie up their long hair and not wear loose clothes.

3. Before starting the carton flexo printer die cutter slotter machine , check if there are any tools or other debris on the paper feeding table. When starting up, you must first press the bell and receive a response from other operators before starting up. If the phone does not ring after turning on, and then rings again after a period of time, confirm the safety of the operation. Direct high-speed operation is not allowed when the machine is started. Starting from zero speed, gradually reach the rated working speed through the speed knob.

4. Operate the slotting section according to the program. The cutting edges of slotting knives and paper splitting knives are very sharp and can easily hurt hands. When slotting, the knife must fall into the next slot and be in the middle position. After adjusting the knife, be sure to lock the fastening screws tightly and pay attention to placing the paper blade into the paper blade groove. After adjusting the four blades, remember to lock the fastening screws tightly. After adjusting the parts, first use the handle to rotate the slotted part a few turns. When the device is running at high speed, if not careful, your hands may touch sharp edges, so be careful. In production, if operating procedures are violated, it is easy to cause injury accidents.

5. When pasting, wiping, adjusting knives, removing dirt, foreign objects, paper, or wiping the machine, the power should be turned off after the machine is shut down, and the surrounding personnel should be reminded to prevent others from turning it on by mistake.

6. When replacing and washing ink, do not touch the rotating parts of the automatic flexo printing die cutting slotting machine, nor use a cloth to wipe the stains on the ink roller;

7. The anilox roller, rubber roller, and printing plate roller are the heart of the printing machine, free from foreign objects and scratches. They must be cleaned before work.

8. When the fully automatic ink printing machine unit is turned off and locked, attention should be paid to the gear engagement, and there should be no foreign objects or people in the middle.

9. Regularly refuel and do not cut off or work with low fuel.

10. All components of the machine should be kept clean and cleaned promptly after operation to prevent corrosion and wear of the components.

If there is any abnormal sound during the operation of the machine, it should be immediately stopped for inspection. After eliminating the cause, it can be restarted.

12. The safety devices on the equipment should remain sensitive and reliable at all times. Do not dismantle or manually adjust the safety device without authorization. If the safety device is damaged, it should be repaired in a timely manner.

13. The appearance of machine tools, electrical control cabinets, electrical devices, and electrical components should be kept clean, and the components should be regularly checked for looseness or aging, and hidden dangers should be promptly eliminated; During debugging and maintenance, the power supply must be cut off.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975