When we use a Semi automatic carton stitching machine to work, we need to pay attention to the correct operation and also pay attention to the maintenance and upkeep of the box nailing machine. Because paying attention to the correct maintenance and upkeep of the machine is a key link in improving production efficiency and nail box quality, which cannot be ignored.

The semi-automatic box stitching machine has a low failure rate and high reliability, and maintenance is crucial. Therefore, the following work should be done well:

The upper nail head punch of the semi automatic stitcher equipment should be lubricated once a day, and every 30 days, the nail head should be disassembled to clean and refuel. The lower nail head must be cleaned frequently due to the accumulation of small electroplating chips on the nail line, which accumulate in the punch. After disassembling the nail head for cleaning and refueling, the three gears on the left and right baffle of the paper feeding belt bolt groove shaft should be installed back. Once every 30 days, grease should be applied to the clutch and brake. No oil or water should enter the servo motor. It must be kept clean to avoid dust coverage, Regularly clean the heat dissipation and dust filter screen of the servo motor drive. The electrical control box should be kept clean to avoid short circuits caused by dust coverage. The inner and outer wire feeding wheel axles should be kept flexible. Use butter to lubricate the nail head fixed shaft and the left and right baffle fixed shaft. When moving, clean and lubricate the upper and lower nail head transmission shafts, bolt groove shafts, and transmission screw oil to lubricate the power transmission box. The gears and chains should be lubricated with butter within 30 days.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975