paper tube equipment is the mechanical equipment for producing paper tubes, and the products produced are widely used in various industries. Before using the paper tube equipment, check whether the printing ink is consistent with the order requirements; Check whether the adhesive meets the requirements; The equipment shall be lubricated in place at the following locations: shaft sleeve, slide rail, cam, oil hole, etc.

When the paper tube equipment is powered on, check whether there is anyone near the equipment, and remind to pay attention to safety. When starting up, turn on the vacuum pump to verify the vacuum pressure, and turn on the air compressor to check the adjusted pressure of each part; After confirming that it is normal, connect the air exhaust facilities of the edger, operate the air exhaust, and open the glue pump to check whether the glue amount is normal.

After all are confirmed to be normal, manual operation shall be carried out to check whether all operating parts are normal. If there is any fault, the fault shall be eliminated first, and semi-automatic operation can be used for production after confirmation. The temperature of drying room reaches the adjusted value: 680 ℃; Before starting the machine, use special tools to clean the grinding tool shaft, clear the residual glue in the mold shaft, and then blow it with compressed air. The brass sleeve must be oiled, and the air exchange valve must be oiled frequently.

During the whole operation process of the paper tube equipment, one person must operate the equipment control switch, and pay attention to whether someone is working on the equipment. When cutting paper, if a ventilation machine is used to cut paper, the height of the paper tube machine shall not exceed 125mm, and the paper tube machine shall be fastened with a positive pressure iron according to the size requirements. The machine tool can only cut paper, not other plates. Two or more people should work together. When working, the paper tube machine is not allowed to put their hands under the pressure iron and blade to prevent cutting injury.

Each piece of equipment must be in the charge of a specially assigned person, and no one can arbitrarily use it. It is strictly prohibited to place other sundries in each part of the machine tool during work, and the staff must not leave the post without permission during operation; When edging, the trouser legs shall be prevented from being drawn into the paper loading floor shaft; When adjusting the machine tool, pay attention to abrasive cloth wheel grinding.

Proper use and maintenance of paper tube equipment can not only prolong the service life, but also ensure the safety performance. Nowadays, paper tubes are widely used in various industries, so the production and use of paper tube machinery are also widely valued, and the performance requirements for paper tube machinery are also improved.

WELLDOING TRADING Co. Ltd. is a manufacturer + sales and after-sales company, which is mainly engaged in large-scale semi-automatic chain-bar water-based printing machine,automatic flexo printer slotter die cutter stacker machine , high-speed high-definition paper box printing and slotting die-cutting machine, 2 layers corrugated production line, box-sticking machine, Tying Machine ,Automatic Partition Assembler Machine, paper tube making machine, flexo ink printing wastewater treatment machine and so on.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975