The composition and working principle of the pasting device of semi-automatic carton folder gluer machine are to facilitate the bonding with the face paper. It is mainly composed of a pasting roller, a metering roller, a paste remover, a scraper, a paste tray, and a baffle plate. The pasting roller rotates in the paste tray containing the drying agent (mostly starch paste), uses the adhesive force of the paste to make the paste on the roll surface, and then the metering roller appropriately limits the amount of coating to apply the quantitative paste on the top of the corrugated core paper. The adjusting roll is equipped with a scraper to scrape the excess paste on the surface of the adjusting roll. The regulating roller can rotate in both positive and negative directions.Semi automatic folding gluing machine which is mainly used for gluing cartons, improves the production efficiency and makes you feel at ease when using it. The specific operation is that the staff folds the processed whole piece of cardboard and sends it to the gluing section. The gluing section automatically applies glue to the cardboard bonding section. After the quantity is reached one by one through the roller to the section, it automatically transfers the pressure, blows and finally completes.

Corrugated carton folder gluer machine can only leave the factory after the completion of inspection, commissioning and acceptance. So let’s share the following spot check of the process of box gluing:

1. If any abnormality is found during sampling inspection, it shall be adjusted in time.

2. After the completion of this batch of orders, the repaired and scrapped cartons shall be sorted out according to the different situations of the cartons, and the scrap quantity shall be recorded and archived; The returned products shall be handed over according to the handover system of the process leader.

3. The first 5 finished boxes of the machine shall 

be fully inspected, and shall be uniformly cleaned after the order is completed to prevent the inclusion of defective products.

4. During the normal bonding process, at least one carton shall be selected from every thirty cartons to observe the printing, die-cutting and bonding conditions; Products that do not meet the quality requirements shall be picked out to avoid mixing into the next process.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975