Today’s paper tube mechanical products are moving towards intelligence. Before using this paper tube making machine, we should first understand the start-up steps of the paper tube machinery!

Firstly, before powering on, it is necessary to plug in the power supply. When plugging in, it is necessary to check whether the wires are damaged and whether there are water droplets on the socket. Only after passing the inspection can it be used. Place the skateboard in its original position and use two springs to pull the adhesive backwards. A gap of about 1mm can be opened at the adhesive stripping point, which can have a good adhesive breaking effect. After completion, cut off the power supply in a timely manner.

Secondly, the power supply of kraft paper tube making machine should adopt a three-phase four wire system. If a malfunction does occur during use, the power should be cut off in a timely manner to avoid damage to the equipment.

In addition, when powered on, the vacuum pump should be turned on to verify the vacuum pressure, and the air compressor should be turned on to check the pressure adjustment of each part. After checking for normal operation, connect the exhaust device of the edge grinding machine, operate the exhaust, and turn on the oil pump to check if the gluing is normal.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975