The key aspects of the operation of the automatic flexo ink printer slotter die cutter machine are the following:

1. Before starting the machine, check whether there are tools or other dirt placed on the top of the paper feeding cabinet. Each time you start the machine, press the bell first, and the other operators of the device can respond before starting the machine. If you do not drive after pressing the bell, you should press the bell again after a period of time, and then start the operation after confirming. It is prohibited to start the machine at high speed immediately, starting from zero speed and slowly achieving the rated operating speed according to the speed knob.

2. For the grooving part, it is necessary to strictly follow the operation. The wounds of the grooving knife and the paper separating knife are very sharp, and it is very easy to hurt the hands; The upper knife should fall into the lower knife slot at the middle of the slot. After adjusting the knife, lock and tighten the screws, and pay attention to placing the paper shovel knife into the paper shovel groove. After aligning with the four knife linkage, remember to lock and firmly tighten the screws. After adjusting and clamping each position, first use the rocker to rotate the slot part for two turns. If there are no abnormalities, you can operate again. When machines and equipment are running at high speeds, they may encounter sharp knife edges without paying attention. It is very important to be careful. During production and manufacturing, it is easy to cause accidents if operating technical specifications are violated.

3. The personnel operating the corrugated carton printing slotting die cutting machine understand the structure, principle, and operation of the machine equipment.

4 color printer die cutter slotter machine

4. When pasting, erasing, knife adjustment, dirt, dirt, paper, or scrubbing a machine, turn off the start switch, power off the machine, and prompt surrounding staff to avoid others turning it on by mistake.

5. When changing or washing ink, do not touch the rotating parts of the machine with your hands, and do not use a towel to wipe the stains on the ink roller;

6. The anilox roller, rubber roller, and printing plate roller are the cardiovascular system of the printing equipment. Dirt and scratches are not allowed. They should be cleaned before work.

7. When checking and tightening the generator set, pay attention to the meshing of the transmission gear and whether there are any dirt or people in the middle.

8. Regularly perform the oil supply, and do not cut off the oil or operate with low oil.

9. All parts of the machine should be kept clean and cleaned immediately after completion of work to prevent damage to parts.

10. Machine operators are allowed to wear gloves to carry out operations. Female employees should have their long hair curled up, and should not wear too loose clothes or pants. It is prohibited to touch the transmission belt, parts of the transmission system, knife heads, etc. to avoid injury.

Our company also has other packaging machines : carton box partition assembler equipment 、 automatic paper angle board machine 、 automatic air bubble film machine 、 flexo water ink wastewater treatment clear machine 、 3 color flexo printer slotter die cutter machine 、4 color flexo printer slotter die cutter machine 、 2 color flexo printing slotting die cutting machine 、automatic nail box machine 、 automatic thin blade machine 、automatic stacking machine 、 Kraft paper slitting and rewinding machine and so on . 

Welcome to email for product details . We’ll supply the best service for you . 

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975